Brocade Mobility RFS Controller CLI Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 298)

282 Brocade Mobility RFS Controller CLI Reference Guide
53-1003098-01
4
rename tlo <TLO-NAME> <NEW-TLO-NAME>
Example
The following example shows the top level objects available for renaming:
rfs4000-229D58(config)#rename
aaa_policy aaa_tacacs_policy address_range_alias
assoc_acl auto_provisioning_policy bridging_policy
captive_portal centro_policy client_identity
client_identity_group device_categorization dhcp_server_policy
dns_whitelist event_system_policy firewall_policy
global_assoc_list host_alias ip_acl
l2tpv3_policy mac_acl management_policy
meshpoint meshpoint_qos mint_policy
mint_security_policy nac_list network_alias
passpoint_policy profile radio_qos
radius_group radius_server_policy radius_user_pool
rf_domain rls_policy role_policy
routing_policy runtime_license service_alias
smart_rf_policy subscriber_policy vlan_alias
wips_policy wlan wlan_qos
wsm_policy device
rfs4000-229D58(config)#
The following examples first clones the existing IP access list
BROADCAST-MULTICAST-CONTROL, and then renames the cloned IP access list:
rfs4000-229D58(config)#show context
!
! Configuration of Brocade Mobility RFS4000 version 5.5.0.0-018D
!
!
version 2.1
!
!
client-identity TestClientIdentity
dhcp 1 message-type request option-codes exact hexstring 5e4d36780b3a7f
!
client-identity-group ClientIdentityGroup
client-identity TestClientIdentity precedence 1
!
ip access-list BROADCAST-MULTICAST-CONTROL
permit tcp any any rule-precedence 10 rule-description "permit all TCP
traffic"
permit udp any eq 67 any eq dhcpc rule-precedence 11 rule-description "permit
DHCP replies"
deny udp any range 137 138 any range 137 138 rule-precedence 20
rule-description "deny windows netbios"
deny ip any 224.0.0.0/4 rule-precedence 21 rule-description "deny IP
multicast"
deny ip any host 255.255.255.255 rule-precedence 22 rule-description "deny IP
local broadcast"
rename tlo
<TLO-NAME>
<NEW-TLO-NAME> Renames an existing TLO object
•
<TLO-NAME> – Specify the TLO’s name. This is the TLO that is to be renamed.
•
<NEW-TLO-NAME> – Specify the new name for this TLO
Enter rename and press Tab to list top level objects available for renaming.