LumaSense Technologies INNOVA 1316A-3 - Manual (Page 23)

Chapter 2
_________________________________________________________________________________________
_____________________________________________________________________________
BE6024-12 1316A-3 Multi Gas Monitor LumaSense Technologies A/S
Instruction Manual Page 23 of 96
2.2.3 Installing the USB driver for the 1316A-3
Before connecting the 1316A-3 monitor the USB driver for the
1316A-3 USB interface must be installed.
1. Insert the “USB driver for Multi Gas Monitor – INNOVA 1316A-
3” CD-ROM disk into the CD-ROM drive and wait for the auto-
start of the USB driver. In case that auto-start is disabled for
your CD drive, you will manually need to start the executable
driver file named “CP210x_VCP_Win2K_XP_S2K3.exe” found
on the software CD-ROM disk.
2. After a while the welcoming window appears. Select ‘Next’ to
continue installation.