LumaSense Technologies INNOVA 1316A-3 User Manual
Page 83
Advertising
Chapter 4
_________________________________________________________________________________________
_____________________________________________________________________________
BE6024-12
1316A-3 Multi Gas Monitor
LumaSense Technologies A/S
Instruction Manual
Page 83 of 96
Figure 4.35. Bench command menu select New NO sensor
The following window appears.
Figure 4.36 . The New NO sensor window.
If a new sensor is installed Press SEND.
Warning: never attempt to send the new NO sensor command after a
NO span calibration unless a new NO sensor has been installed.
Advertising