Fire-Lite MS-25E Addressable Fire Control Panel - Manual (Page 17)

53688 2-1
Section 2
Agency Listings, Approvals, and Requirements
Install and maintain in accordance with NFPA 72. Detector spacing shall be in accordance to
NFPA 72. End-of -line relays and resistors shall be placed within the electrical box located
and the end of the initiating circuit. Testing and maintenance should be performed according
to NFPA 72.
2.1 Federal Communications Commission (FCC)
The following information must be provided to the telephone company before the MS-25 can
be connected to the phone lines:
1. This device may not be directly connected to coin telephone or party line services.
2. This device cannot be adjusted or repaired in the field. In case of trouble with the device,
notify the installing company or return to:
Fire-Lite Alarms
1 Firelite Place
Northford, CT 06472-1653
203-484-7161
3. If the MS-25 causes harm to the telephone network, the telephone company will notify the
user in advance that temporary discontinuance of service may be required. If advance
notice is not practical, the telephone company will notify the user as soon as possible.
Users have the right to file complaints, if necessary, with the Federal Communications
Commission.
A Manufacturer: Honeywell International Inc.
B Model Number: MS-25
C FCC registration number: US: AC6AL05B205600
Ringer equivalence: 0.5B
D Type of jack: RJ31X
E Facility Interface Codes: Loop Start: 02LS2
Ground Start: 02GS2
F Service Order Code: 9.0F