HT instruments PVCHECK - Manual (Page 10)

PVCHECK
EN - 8
4.2. KEYBOARD DESCRIPTION
The keyboard includes the following keys:
ON/OFF key to switch on/off the instrument
ESC/MENU key to exit the selected menu without confirming and to go back to
the main menu
    keys to move the cursor inside the various screens in order to select
programming parameters
ENTER key to confirm modifications, selected programming parameters and to
select the function to be accessed from the menu.
GO/STOP key to start measurements
SAVE key to save the measured values
HELP key (long pressing) to access the on-line help, to view the possible
connections between the instrument and the installation.
key (simple pressing) to activate the display’s backlighting
4.3. DISPLAY
DESCRIPTION
The display is a graphic module with a resolution of 128 x 128
dots. The display’s first line indicates the system’s date/time
and contains the battery charge indicator.
At the bottom of the display, the function of the ENTER key
and the active mode are displayed.
The symbol
indicates the presence of an active radio
connection with the remote unit SOLAR-02.
The flashing symbol
indicates that the instrument is
currently searching for a radio connection with the remote unit
SOLAR-02.
15/05/12 15:34:26
Selection
4.4. INITIAL
SCREEN
When switching on the instrument, the initial screen appears
for a few seconds. It shows:
 The instrument model (PVCHECK)
 The manufacturer’s name
 The presence of the enabled internal module for RF
connection
 The serial number (SN:) of the instrument
 The firmware version (FW:) in the instrument's memory
 The date of the last instrument calibration (Calibration
date:)
P V C H E C K
H T
R F S N : 1 2 3 4 5 6 7 8
FW: 1.02
Calibration date:
09/11/2012
After a few seconds, the instrument switches to the last function selected.