HT instruments PVCHECK - Manual (Page 11)

PVCHECK
EN - 9
5. GENERAL MENU
Pressing the ESC/MENU key in any condition of the
instrument displays the general menu screen, in which the
instrument may be set, the saved measures can be displayed
and the desired measuring function may be selected.
Use the cursor to select one of the options and confirm with
ENTER to access the desired function. 15/05/12 15:34:26
I V C K T e s t m o d . / s t r i n g s
L O W
 P E C o n t i n u i t y t e s t
M
 I n s u l a t i o n t e s t
E F F E f f i c i e n c y t e s t
S E T S e t t i n g s
DB Archive modules
M E M R e c a l l M e m o r y
PC Trasf. data to PC
P r e s s E N T E R t o s e l .
M E N U
5.1.
SET – INSTRUMENT SETTINGS
Position the cursor onto SET by using the arrow keys (
,)
and confirm with ENTER. The display shows the screen
which lists the different settings of the instrument.
Settings will be maintained also after switching off the
instrument.
15/05/12 15:34:26
G e n e r a l
M e a s u r i n g u n i t
D a t e a n d T i m e
R e m o t e U n i t - P y r a n o m e t e r
I r r a d i a n c e
D C C l a m p
P r e s s E N T E R t o s e l .
S E T
5.1.1. General
1. Position the cursor onto General by using the arrow keys
(
,) and confirm with ENTER.
2. The display shows the screen which allows:
 Setting the instrument language
 Enabling/disabling the auto power off function
 Adjusting display contrast
 Enabling the acoustic signal when pressing a key.
3. Use the arrow keys (
,) for option setting, and select
the desired option by means of the arrow keys (
 , ).
4. Press the SAVE key to save the settings made; the
message “Data saved” will be displayed for a few
seconds. Press the ESC/MENU key to exit without saving
and go back to the previous screen.
15/05/12 15:34:26
L a n g u a g e :  E n g l i s h 
A u t o P o w e r O f f : N O
C o n t r a s t : : 4 0
K e y B e e p : N O
S A V E t o s t o r e
S E T