Safe testing – KYORITSU 6050 User Manual

Page 3

Advertising
background image

̶ 1 ̶

 1. SAFE TESTING

#

Electricity is dangerous and can cause injury and death. Always treat it

with the greatest of respect and care. If you are not quite sure how to

proceed, stop and take advice from a qualified person. This instruction

manual contains warning and safety rules which must be observed by

the user to ensure safe operation of the instrument and retain it in safe

condition. Therefore, read through these operating instructions before

using the instrument.

IMPORTANT:

1. This instrument must only be used by a competent and trained

person and operated in strict accordance with the instructions.

KYORITSU will not accept liability for any damage or injury caused

by misuse or non- compliance with the instructions or with the safety

procedures.

2. It is essential to read and to understand the safety rules contained in

the instructions or with the safety procedures.

The symbol

#

indicated on the instrument means that the user must

refer to the related sections in the manual for safe operation of the

instrument. Be sure to carefully read instructions following each

symbol

#

in this manual.

#

DANGER is reserved for conditions and actions that are likely to

cause serious or fatal injury.

#

WARNING is reserved for conditions and actions that can cause

serious or fatal injury.

#

CAUTION is reserved for conditions and actions that can cause a

minor injury or instrument damage.

Advertising