Servicing, Case and strap assembly – KYORITSU 6050 User Manual
Page 31
̶ 29 ̶
11. SERVICING
If this tester should fail to operate correctly, return it to your distributor
stating the exact nature of the fault. Before returning the instrument
ensure that:-
1. The batteries are in good condition.
Please remember to give all the information possible concerning the
nature of the fault, as this will mean that the instrument will be serviced
and returned to you more quickly.
12. CASE AND STRAP ASSEMBLY
Correct assembly is shown in Fig20,21. By hanging the instrument
round the neck, both hands will be left free for testing.
Fig.20
Fig.21
Pass the strap belt down through
the side panel of the main body
from the top, and up through the
slots of the probe case from the
bottom.
Pass the strap through the buckle,
adjust the strap for length and
secure.