KYORITSU 6050 - Manual (Page 4)

̶ 2 ̶
# DANGER
● This instrument corresponds to L-PE: 230V+10%-15%50Hz. (for
some of ranges; L-L: 400V+10%-15%50Hz)
Be sure to use it within this rated voltage.
● When conducting tests do not touch any exposed metalwork
associated with the installation. Such metalwork may become live
for the duration of the test.
● When testing, always be sure to keep your fingers behind the
safety barriers on the test leads.
● For safety reasons only use accessories (test leads, probes,
cases, etc)designed to be used with this instrument and
recommended by KYORITSU. The use of other accessories is
prohibited as they are unlikely to have the correct safety features.
● THE WIRING CHECK LED (P-E, P-N) of this instrument is to
protect the user from electrical shock resulting from incorrect
connection of Line and Neutral or Line and Earth.
When the Neutral and Earth conductors are incorrectly wired, the
WIRING CHECK LED function cannot identify the incorrect
connection. Other procedures and test must be conducted to
check and confirm that the wiring is correct prior to making
measurement.
Do not use this instrument to check the correct wiring of the power
supply.
Kyoritsu will not be held liable for any accident that may result from
incorrect wiring of the power supply line.