KYORITSU 6050 - Manual (Page 30)

̶ 28 ̶
● Model 8212 system requirements
(1) PC/AT compatible machine on which Microsoft Windows ®
98/ME/2000/XP can operate.
(2) Pentium 233MHz or more recommended.
(3) RAM 64Mbyte or more.
(4) SVGA (800X600) or more.
XGA(1024X768) recommended.
(5) 20MB or more of free hard disk space recommended.
(6) One free COM port
(7) CD-ROM drive (necessary at installing)
● Trade mark
Windows ® is a registered trade mark of Microsoft in the United
states.
Pentium is a registered trade mark of Intel in the United states.
10. BATTERY REPLACEMENT
# DANGER
● Never open the battery compartment cover while making
measurement. To avoid possible electrical shock, disconnect
the test probe before opening the cover for battery replacement.
# CAUTION
● Install batteries in correct polarity as marked inside.
① Disconnect Test Lead from the
instrument.
② Open the battery compartment
cover by unscrewing the metal
captive screw to reveal battery
compartment. Always replace all
eight batteries with new ones at
the same time.
Battery type: 8 x R6P, 1.5V AA or
equivalent
Fig.19