Avvertenze generali per l'installatore, Conservazione della documentazione, Avvertenze sulla sicurezza e norme d'installazione – Airedale EcoChill 6kW - 46kW User Manual
Page 60: General instructions for the installer, Conservation of documentation, Safety instructions and installation standards
60
EcoChill Installation Manual 7481930_v1.6.0_08_2013
ECL-ECLH 020-202
EN
TE
CHNICAL
SE
CTION
INS
TALLA
TION
SE
CTION
USER
SE
CTION
Standards applied in the DESIGN and
MANUFACTURE of the unit:
SAFETY
1.
Machinery directive
2006/42/CE
2.
Low voltage directive
LVD 2006/95/CE
3.
Electromagnetic compatibility
directive EMC 2004/108/CE
4.
Pressure vessel directive
PED 97/23/CE, EN 378,
5.
UNI12735, UNI14276
ELECTRICAL
1.
IEC EN 60335-2-40,
2.
IEC EN 61000-6-1/2/3/4
ACOUSTICAL
1.
ISO DIS 9614/2
(intensity method)
PROTECTIVE RATING
IP24
CERTIFICATION
EUROVENT
UNI EN 14511:2011
REFRIGERANT
This unit contains fluoride gases with
greenhouse effect covered by the Kyoto
Protocol. Maintenance and disposal
must only be carried out by qualified
staff, in accordance with local regula-
tions
WARNING
1.
The refrigerant circuit is under
pressure. Additionally, high tem-
peratures can be generated. The
unit can only be worked on by a
TAS technical assistance operative
or a qualified technician. Inter-
ventions on the refrigerant circuit
can only be carried out by a quali-
fied refrigeration technician.
2.
GAS R410A
The units are delivered with their
operating charges of refriger-
ant R410A. This is a refrigerant
without chlorine which does not
damage the ozone layer. R410A is
not flammable. All maintenance
procedures must be carried out
by a qualified technician with the
appropriate safety equipment.
3.
Danger of electrical shock!
Completely disconnect the unit
from the power supply before
starting procedures.
19. GENERAL INSTRUCTIONS FOR THE INSTALLER
The AIREDALE ECL units are manufactured in accord-
ance with recognised technical and safety standards.
They are designed for air conditioning and production
of domestic hot water (DHW) and must be used in a
manner compatible with their performance character-
istics. All contractual and extra-contractual liabilities
causing damage to persons, animals or objects or
through errors of installation, control or maintenance
or from improper use are excluded by the Company.
Any uses not expressly indicated in this manual are not
permitted.
19.1. CONSERVATION OF DOCUMENTATION
1.
Submit the manual with all supplementary
documentation to the system user who will be
responsible for the conservation of documents
so that they can be available when needed.
2.
Read this manual fully: all works must be carried
out by qualified personnel, in accordance with
any applicable current local regulations.
3.
The unit must be installed in a manner to render
possible maintenance and/or repair operations.
4.
The equipment warranty does not cover any
costs associated with lifting or access equipment
necessary for warranty procedures.
5.
Do not modify or tamper with the equipment
as this could result in accidents for which the
manufacturer will not be held responsible. The
warranty will be voided if the above mentioned
warnings are not respected.
19.2. SAFETY INSTRUCTIONS AND INSTALLA-
TION STANDARDS
1.
The equipment must be installed by a competent
and qualified technician, in compliance with the
applicable national legislation of the country of
destination. AIREDALE assumes no responsibil-
ity for any losses incurred by not observing these
instructions.
2.
Before commencing any works it is necessary
to CAREFULLY READ THE INSTRUCTIONS AND
MINIMISE ANY RISKS BY TAKING APPROPRIATE
SAFETY PRECAUTIONS. All relevant personnel
must be made aware of the procedures and
possible risks that may arise at the time of instal-
lation of the unit.