Badger Meter ORION Classic (CE) - Manual (Page 16)

Modem Info
Select Modem Info on the IR Programming screen to display the Modem Properties for the ORION Cellular endpoint
Figure 15: cellular endpoint modem properties
1 Align the optical head of the IR cable with the ORION Cellular endpoint IR LED port You may need to perform a
magnet swipe on the ORION Cellular endpoint to activate IR communication
2 On the ORION IR Programming screen, tap Read to read the endpoint
3 Tap Modem Info.
Result: The Modem Properties screen opens.
Scroll to see all the information on the screen. Tap Back to return to the IR Programming screen. The information refreshes
each time you tap Modem Info.
NOTE: N The Save button is for Technical Support use only
Mode
The Mode field can display the following statuses for the ORION Cellular endpoint
On Cellular Mode Endpoint is initialized and communicating with BEACON
Provision Mode
Endpoint initialization failed to communicate with BEACON The endpoint will attempt to establish a
connection at its normally scheduled transmit time
Stopped Endpoint communications stopped
IMNOOTAO I
The Mode button is used to Stop the endpoint and should only be selected when instructed to by Badger Meter
Technical Support.
ORION IR PROgRAMMINg
Page 16 April 2014 ORION® Endpoint Utility for Trimble® Ranger 3