Badger Meter ORION Classic (CE) - Manual (Page 30)

Setting GPS Location Manually
1 Tap the Set GPS Location button on the Advanced screen
2 Check the Manual Entry box
3 Tap in the lat field and use the handheld keypad or the onscreen keyboard to type the latitude Tap in the long field
and use the handheld keypad or the onscreen keyboard to type the longitude Make sure to add the decimal points
and a minus sign, if applicable
NOTE: N The minus sign/dash and the decimal point on the handheld numeric keypad are on the last row of blue
keys as shown in Figure 37
4 With the IR cable connected to the handheld, align the optical head with the endpoint IR LED port and tap Program
Result: The gPS location is programmed and displays next to the Set gPS location button on the Advanced screen as
shown in Figure 38.
Figure 36: gPS manual entry
Figure 37: Minus sign/dash (left) and decimal point (right)
Figure 38: Endpoint gPS data programmed
ORION IR PROgRAMMINg
Page 30 April 2014 ORION® Endpoint Utility for Trimble® Ranger 3