Orion quick read – Badger Meter ORION Classic (CE) User Manual
Page 42
ORION QUICK READ
The ORION Quick Read functions are used to listen for ORION Migratable and Classic endpoints within range using radio
frequency (RF) ORION Quick Read - All is used to listen to all endpoints within range ORION Quick Read - Single is used to
listen for a specific endpoint within range
NOTE:
N
Cellular endpoints cannot be read via RF, therefore, Quick Read functions do not apply to ORION Cellular endpoints
Figure 65: ORION Quick Read - All
Quick Read is used to perform a number of functions on ORION Migratable and Classic endpoints and touch modules The
most common uses of Quick Read include:
•
Reading an endpoint or touch module (outside of the route reading process) when testing or troubleshooting at a
customer site
•
Reading one or more endpoints or touch modules prior to installation, to verify the endpoints or modules are
working correctly
•
Clearing a tamper and reprogramming the odometer (RTR only) after the wire repair
•
Testing a newly installed endpoint
•
Performing meter testing at the meter shop
•
Getting a final reading from a meter
NOTE:
N
Make sure the handheld is configured for the type of endpoint you want to read See
for more
information.
When finished using the ORION Quick Read functions, tap the Menu button to choose another ORION Endpoint Utility option
or exit the software
ORION QUIck REAd
Page 42
April 2014
ORION® Endpoint Utility for Trimble® Ranger 3