Canon Color imageCLASS MF9280Cdn - Manual (Page 12)

Impor
tan
t S
af
et
y I
nstruc
tions
x
Important Safety Instructions
When connecting the interface cable, connect it
properly by following the instructions in this manual. If
not connected properly, this may result in malfunction
or electrical shock.
When installing the machine with casters, always lock
the casters. Otherwise, the machine may move or tip
over, resulting in personal injury.
When moving the machine, follow the instructions in
this manual to hold it correctly. Failure to do so may
cause you to drop the machine, resulting in personal
injury. (See “Transporting the Machine,” on p. 11-19.)
Power Supply
Do not damage or modify the power cord. Also, do not
place heavy objects on the power cord or pull on or
excessively bend it. This can cause electrical damage,
resulting in fire or electrical shock.
Keep the power cord away from all heat sources. Failure
to do so can cause the power cord insulation to melt,
resulting in a fire or electrical shock.
The power cord should not be taut, as this may lead to
a loose connection and cause overheating, which could
result in a fire.
The power cord may become damaged if it is stepped
on, fixed with staples, or if heavy objects are placed on
it. Continued use of a damaged power cord can lead to
an accident, such as a fire or electrical shock.
Do not plug or unplug the power plug with wet hands,
as this can result in electrical shock.
Do not plug the power cord into a multiplug power
strip, as this can result in a fire or electrical shock.
Do not bundle up or tie up the power cord in a knot, as
this can result in a fire or electrical shock.
Insert the power plug completely into the AC power
outlet. Failure to do so can result in a fire or electrical
shock.
If excessive stress is applied to the connection part of
the power cord, it may damage the power cord or the
wires inside the machine may disconnect. This could
result in a fire. Avoid the following situations:
Connecting and disconnecting the power cord
frequently.
Tripping over the power cord.
The power cord is bent near the connection part,
and continuous stress is being applied to the power
outlet or the connection part.
Applying a shock to the power connector.
–
–
–
–
–
–
–
–
–
–
–
–
•
•
•
•
Do not use power cords other than the one provided,
as this can result in a fire or electrical shock.
As a general rule, do not use extension cords. Using an
extension cord may result in a fire or electrical shock.
Remove the power plug from the AC power outlet
and refrain from using the machine while it thunders.
Lightening can result in a fire, electrical shock or
malfunction.
Do not use a power supply voltage other than that
listed herein, as this may result in a fire or electrical
shock.
Always grasp the power plug when unplugging the
power plug. Do not pull on the power cord, as this may
expose the core wire of the power cord or damage the
cord insulation, causing electricity to leak, resulting in a
fire or electrical shock.
Leave sufficient space around the power plug so that it
can be unplugged easily. If objects are placed around
the power plug, you may be unable to unplug it in an
emergency.
Handling
Do not disassemble or modify the machine. There are
high-temperature and high-voltage components inside
the machine which may result in a fire or electrical
shock.
Electrical equipment can be hazardous if not used
properly. Do not allow children to touch the power
cord, cables, internal gears, or electrical parts.
If the machine makes an unusual noise or emits smoke,
heat, or an unusual smell, immediately turn off the
power switches of the machine and computer and
disconnect the interface cable if it is connected. Then,
unplug the power plug from the AC power outlet and
contact your local authorized Canon dealer. Continued
use can result in a fire or electrical shock.
Do not use flammable sprays near the machine. If
flammable substances come into contact with electrical
parts inside the machine, this may result in a fire or
electrical shock.
Always turn off the power switches of the machine
and computer, and then unplug the power plug and
interface cables before moving the machine. Failure to
do so can damage the cables or cords, resulting in a fire
or electrical shock.
–
–
–
–
–
–
–
–
–
–
–