Canon Color imageCLASS MF9280Cdn - Manual (Page 161)

Cop
ying
4-14
Selecting Paper Source
7
Use [ ▼], [▲] or (Scroll Wheel) to
specify the length of X, then press [OK].
You can adjust values for <X> between 3”
(76 mm) and 8 1/2” (216 mm).
8
Use [ ▼] or (Scroll Wheel) to select the
vertical length <Y>, then press [OK].
9
Use [ ▼], [▲] or (Scroll Wheel) to
specify the length of Y, then press [OK].
You can adjust values for <Y> between 5”
(127 mm) and 14” (356 mm).
10
Use [ ▼] or (Scroll Wheel) to select
<Set Size>, then press [OK].
11
Use [ ▼], [▲] or (Scroll Wheel) to select
the desired paper type, then press [OK].
You can select from the following paper types:
<Plain 1>, <Plain 2>, <Recycled Paper>,
<Color>, <Bond>, <Heavy 1>, <Heavy 2>,
<Labels>, <Envelope>
For details, see “Paper Requirements,” on p. 2-7.
If you want to print the back side of the printed
paper, press the right Any key to select <2nd of 2-
Sided>.
12
Use [ ▼], [▲] or (Scroll Wheel) to select
<Stack Bypass: Custom Size>, then press
[OK].