Canon Color imageCLASS MF9280Cdn - Manual (Page 274)

Fax
5-53
Adjusting Density
6
Use [ ▼], [▲] or (Scroll Wheel) to select
background setting, then press [OK].
<Off>: Does not erase the background color
of the original.
<Background Removal>: If you want to erase
the background color of the original,
following step is not necessary.
<Background Fine Adjust.>: If you want to
make fine adjustments to the density of the
background color, go to the next step.
7
Use [ ▼], [▲] or (Scroll Wheel) to select
the desired color, then press [OK].
8
Use [ ◀], [▶] or (Scroll Wheel) to
adjust the strength of the color, then
press [OK].
If you adjust the strength of <Yellow>, the levels
of <Red> and <Green> adjust automatically to
the same level as <Yellow>. If you adjust the
strength of <Red> or <Green>, the <Yellow>
level returns to its default level.
–
–
–
9
Press the right Any key to select <Set>.