Canon Color imageCLASS MF9280Cdn - Manual (Page 241)

Fax
5-20
Sending Fax Documents
3
Press (Main Menu).
4
Use [ ▼], [▲] or (Scroll Wheel) to select
<Send/Fax>, then press [OK].
5
Use [ ▼], [▲] or (Scroll Wheel) to select
<Enter Fax (New)>, then press [OK].
6
Press the left Any key to select <Hook> or
pick up the handset of your external
telephone.
7
Dial the recipient’s fax number.
You can enter up to 40 characters for the fax
number.
Make sure to confirm the dial tone before
entering a fax number. If you enter the
number before the dial tone can be heard, the
call may not connect, or the wrong number
may be dialed.
–
–
8
Talk through the handset to the recipient.
If you select <Hook> in step 6, you can pick
up the handset when you hear the recipient’s
voice.
If you hear a high-pitched signal instead of
the recipient’s voice, go to step 10.
9
Ask the recipient to set their fax machine
to receive faxes.
10
When you hear a high-pitched signal, use
[ ▼], [▲] or (Scroll Wheel) to select
<RX Start>, then press [OK] before
hanging up the handset.
Scanning starts, and the scanned data is sent
to the specified destination.
To cancel scanning, press the left Any key to
select <Cancel>.
–
–
–
–