Canon Color imageCLASS MF9280Cdn - Manual (Page 199)

Cop
ying
4-52
Erasing Shadows/Lines
6
Use [ ▼], [▲] or (Scroll Wheel) to select
the original size, then press [OK].
To switch to the inch sizes, press the left Any key
to select <A/B Sizes>.
7
Use [ ▼], [▲] or (Scroll Wheel) to select
the hole punch location, then press [OK].
To enter values in millimeters, press the left Any
key to select <Enter mm>.
8
Use [ ▼], [▲] or (Scroll Wheel) to select
the frame erase width, then press [OK].
The default setting is <3/4" (18 mm)>. The
maximum original frame erase width that you
can set is <13/16" (20 mm)>.
If you want to change the value, press
(Clear) before entering the new value.
If you enter a value outside the setting range, a
message prompting you to enter an
appropriate value appears on the screen.
When entering the value in millimeters, you
can also use [
▼], [▲], (Scroll Wheel), or
– (numeric keys).
–
–
–
–
9
Use – (numeric keys) to enter the
desired copy quantity (1 to 99).