Canon Color imageCLASS MF9280Cdn - Manual (Page 294)

Fax
5-73
Job Recall
Job Recall
You can recall the last three addresses, scan settings, and send settings which have been set
in the <Log>, and then send your documents.
The settings such as destinations, scan settings and send settings are stored in a log. The actions below after you change
settings are not recorded in a log:
Pressing the (Start) or (Reset) or (Main Menu).
Activation of the Auto Clear mode.
Turning OFF the machine.
Identical send settings are stored only once in recall memory.
If <Restrict New Addresses> in <Restrict the Send Function> in <System Management Set.> under <Additional Func.> is
set to <On>, the addresses specified from the Address Book are only recalled.
The settings that were stored in memory are not erased even when the main power is turned OFF.
If <Restrict Sending From Log> in <Restrict the Send Function> in <System Management Set.> under <Additional Func.>
is set to <On>, you cannot specify a destination using the <Log>. (See “Security,” in the e-Manual.)
–
•
•
•
–
–
–
–
1
Place your originals.
2
Press (Main Menu).
3
Use [ ▼], [▲] or (Scroll Wheel) to select
<Send/Fax>, then press [OK].
4
Use [ ▼], [▲] or (Scroll Wheel) to select
<Log>, then press [OK].
5
Use [ ▼], [▲] or (Scroll Wheel) to select
<Mode 1>, <Mode 2> or <Mode 3>, then
press [OK].
You can check the recall settings by pressing the
left Any key to select <Details>.