Canon Color imageCLASS MF9280Cdn - Manual (Page 275)

Fax
5-54
Selecting Image Quality
Selecting Image Quality
You can manually select the original type according to the type of image that you are
scanning.
The default setting is <Text/Photo>.
Combinations of these three modes (Text/Photo, Photo, and Text) cannot be selected at the same time. If you select one
of these modes, the previously set mode is canceled.
If you scan an original containing halftones, such as a printed image, using the <Photo> mode, the moiré effect (a
shimmering, wavy pattern) may occur. In this case, you can lessen this moiré effect by using the sharpness mode. (See
“Adjusting Sharpness,” on p. 5-92.)
If the original is a transparency, select the original type and adjust the exposure to the most appropriate level for the
original.
For details on how to send the documents, see “Basic Methods for Sending Faxes,” on p. 5-17. –
–
–
–
1
Press (Main Menu).
2
Use [ ▼], [▲] or (Scroll Wheel) to select
<Send/Fax>, then press [OK].
3
Specify a destination.
For details about how to specify destinations, see
“Specifying Destinations,” on p. 5-30.
4
Use [ ▼], [▲] or (Scroll Wheel) to
display <Original Image Quality
Settings>, then press [OK].