Canon Color imageCLASS MF9280Cdn - Manual (Page 227)

Fax
5-6
Introduction to Using Fax Functions
Fax/Tel Auto Swtch Mode
In this mode, the machine receives documents automatically for fax calls and the external telephone
connected to the machine rings for telephone calls. (If <Incoming Ring> is set to <On>, the external
telephone rings for both fax and telephone calls. To set the telephone to ring only when a telephone call is
received, set <Incoming Ring> to <Off>.)
Before using this mode
Make sure to do the following:
Connect your external telephone to the machine. (See “Introduction of the Machine,” in the e-Manual.)
Set the receive mode to <Fax/Tel Auto Switch>. (See “Selecting the Receive Mode,” on p. 5-9.)
When an incoming call is received
Incoming calls or outgoing calls may not work properly, depending on the type of the external telephone connected to the machine.
If you want to change <Incoming Ring>, see “Setting the Incoming Ring Tone,” on p. 5-111.
If you want to change <Ring Start Time>, <Fax/Tel Ring Time>, or <After Ring Action>, see “Selecting the Receive Mode,” on p. 5-9.
●
●
–
–
●
–
–
–