Canon Color imageCLASS MF9280Cdn - Manual (Page 244)

Fax
5-23
Sending Fax Documents
4
Use [ ▼], [▲] or (Scroll Wheel) to select
<Enter Fax (New)>, then press [OK].
5
Enter the international access code using
– (numeric keys).
6
If necessary, use [ ▼], [▲] or (Scroll
Wheel) to select <Pause>, then press
[OK].
You can enter successive pauses within the fax
number to make the pause time longer.
You can change the length of a pause inserted
within the fax number in <Set Pause Time>.
The default setting is two second. (See
“Adjusting the Pause Time,” on p. 5-78.) –
–
7
Enter the country code, the area code,
and the fax number of the recipient.
8
If necessary, use [ ▼], [▲] or (Scroll
Wheel) to select <Pause>, then press
[OK].
Pauses entered at the end of fax numbers are
always 10 seconds long.
9
Press (Start).
Scanning starts if the original is placed in the
feeder, and the scanned data is sent to the
specified destination when scanning is
complete.
To cancel scanning, press the left Any key to
select <Cancel>.
–
–