Canon Color imageCLASS MF9280Cdn - Manual (Page 145)

3-62
Storing/Editing One-Touch
Reg
ist
er
ing D
estina
tions in the A
ddr
ess B
ook
Erasing Addresses Registered in One-Touch
This section describes the procedure for erasing addresses registered in one-touch.
This section describes how to erase one-touch destinations from the Additional Functions screen. You can also erase them from the
Select Send Type screen, as follows:
In the Select Send Type screen, press the right Any key to select <One-touch>.
Use [
▼], [▲] or (Scroll Wheel) to select the one-touch you want to erase.
Press the left Any key to select <Reg/Edit/Erase>.
Use [
▼], [▲] or (Scroll Wheel) to select <Erase from One-touch>, then press [OK].
Follow the procedure described in this section from step 7.
–
–
–
–
–
1
Press (Main Menu).
2
Press the right Any key to select
<Additional Func.>.
3
Use [ ▼], [▲] or (Scroll Wheel) to select
<Address Book Settings>, then press [OK].
If a password has been set for the Address Book,
enter the password to enter Address Book
Settings menu. Enter the password using –
(numeric keys), then press [OK]. (For details
about the Address Book password, see “Security,”
in the e-Manual.)
4
Use [ ▼], [▲] or (Scroll Wheel) to select
<Register One-touch>, then press [OK].
5
Use [ ▼], [▲] or (Scroll Wheel) to select
the one-touch you want to erase, then
press [OK].
You cannot erase multiple one-touch
destinations at the same time.
If the desired one-touch is not displayed, use
[
▼], [▲] or (Scroll Wheel) to scroll to the
desired one-touch.
–
–