Control panel, User controls and system status indicators – AirSep Eclipse 5 20631679 User Manual
Page 15
Personal Ambulatory Oxygen System Provider Technical Manual
15
PN 20631679 Rev C
CONTROL PANEL
Figure 3: User Control Panel
uSER CONTROLS AND SySTEM STATuS INDICATORS
The Eclipse 5 control panel displays important operating information. This section will help you understand this op-
erating information.
The control panel provides a user interface consisting of a membrane panel keyboard, Liquid Crystal Display (LCD), external
power present indicator, Power Cartridge capacity indicator, alarm status indicators, and an audio transducer. The user interface
informs the user of the system status and allows the user to set the desired flow rate and flow mode.
ON/OFF Button (Green) Indicator:
This button powers the device ON or OFF. The Green Indicator is
illuminated when the device is ON.
Increase or Decrease Setting Buttons:
Use these buttons to change prescribed settings.
Delivery Mode Button and Indicator:
The button toggles between Continuous Flow and Pulse Dose
Mode. The Pulse Dose Mode activates autoSAT Technology—as the patient’s breath rate changes,
the Eclipse 5 servo controls the unit to provide a consistent bolus size. The Pulse Dose Mode allows
a significant increase in the operating time while powered by the battery. When Pulse Dose Mode is
activated, the green Delivery Mode Indicator illuminates and a pulse of oxygen is delivered with each
inspiratory effort. When in Continuous Mode, the LED is off.