AirSep Eclipse 5 20631679 - Manual (Page 25)

Personal Ambulatory Oxygen System Provider Technical Manual
25
PN 20631679 Rev C
INTRODuCTION
Welcome to the Eclipse 5, Personal Ambulatory Oxygen System with autoSAT Technology. Setting up and training your patient
to use the Eclipse 5 has never been easier! You can expect your patients and care providers to easily learn how to use the
device by following the directions in this section. While setting up and training a patient, be sure to point out the advantages
of the Eclipse 5. For example:
Slim and sleek appearance
Easy-to-use controls
Quiet operation
Lower electric bills
Self-monitoring alarm system
More consistent FiO
2
at higher breath rates
After completing each training procedure, ask your patient if he or she has any questions. Proper training of your patients will
result in fewer service calls, improved compliance and increased patient satisfaction.
PRE-DELIVERy CHECK LIST
Before delivering the device, check and log the status of the following:
Parts Inventory – Verify that each Eclipse 5 is provided to the patient with the following items:
a Users Manual
a Quick Start Guide
a Eclipse 5 Passport
a Universal Cart
a Cannula
a AC Power Cord
a AC Power Supply
a DC Power Supply
a Power Cartridge (Battery)
a Air Inlet Filter and Spare
Power Sources – Insert and check the following for proper operation:
aAC Power Supply with Power Cord
aDC Power Supply
aPower Cartridge (Battery)
Electrical System – Use the Control Panel to check and/or adjust the following:
The Eclipse 5 is shipped from SeQual at default flow settings of 2 LPM Continuous Flow, 2.0 Pulse Dose, and 2 for Pulse Mode
Sensitivity Adjustment and FAST Rise Time. You may adjust these settings to your patient’s prescription when you deliver and
set up the device.
Training The Patient
a Pulse Dose Setting
a Continuous Flow Setting
a Hour meter
a Pulse Dose Sensitivity
a 9V Battery Status
a Rise Time
a Software Revision
a Power Cartridge Status Gauge