Savin 4800WD - Manual (Page 113)

Supplementary Information
103
5
❖ ❖ ❖ ❖ Adjust Print Position
• You can adjust the print position from 200 mm (7.9") left to 200 mm (7.9")
right, and from 200 mm (7.9") up to 200 mm (7.9") down in increments of 1
mm (0.1").
• If you set the margin too long for the original, parts of the image might not
copy.
• When using with the stamp functions, the stamp position moves according
to the orientation and length of the print position setting.
• You can use this function for copy sizes up to A0 (E) K.
DolphinC2_ENcopy_F_FM.book Page 103 Friday, February 25, 2005 10:46 AM