Savin 4800WD - Manual (Page 83)

If You Cannot Make Copies As You Want
73
3
If You Cannot Make Copies As You Want
This section explains causes of, and solutions for, unexpected copy results.
Problem Causes Solutions
Misfeeds occur frequently. The paper is folded or
creased. Cut away the folded or
creased part from the roll pa-
per.
Jammed or torn paper is in-
side the machine. Remove the paper properly.
See “
xClearing Misfeeds”,
General Settings Guide.
The paper is curled. Smooth out the curl and try
again.
Images are cropped when us-
ing Erase Border. The Erase Border setting is too
wide.
The margin of the original is
too narrow.
Set the Erase Border setting
narrower. See p.48 “Erase Bor-
der”.
Parts of the image are not copied. The original is not placed cor-
rectly.
Place the original correctly.
See p.15 “Placing Originals”.
An improper size of paper is
selected. Select the proper paper. See
“Copy Paper”, General Set-
tings Guide.
Print Position Adjustment or
Margin Adjustment mode is
selected. Cancel Print Position Adjust-
ment or Margin Adjustment
mode. See p.50 “Margin Ad-
justment” and p.61 “Adjust
Print Position”.
You placed a custom size orig-
inal. Enter the size of the original,
or set the scanning area wider.
See p.17 “Placing Custom Size
Originals” and p.17 “Wide
Scan”.
Copies are blank. The original is not set correct-
ly. Place the original with the sur-
face to be copied on face up.
The machine does not start
copying even though you
have inserted paper into the
paper bypass. The number of copies has not
been entered. Enter the number of copies us-
ing the number keys. See
⇒
p.25 “Copying from the Paper
Bypass”.
DolphinC2_ENcopy_F_FM.book Page 73 Friday, February 25, 2005 10:46 AM