Savin 4800WD - Manual (Page 14)

4
12. Operation switch
Press this switch to turn the power on
(the On indicator goes on). To turn the
power off, press this switch again (the On
indicator goes off). See ”Turning On the
Power”, General Settings Guide.
13. {{{{Sample Copy}}}} key
Press to make a single sample copy be-
fore starting a long copy run. By checking
the sample copy and making any neces-
sary changes to the image quality settings
before you make multiple copies, you can
save time and paper. See p.34 “Sample
Copy”.
14. {{{{Start}}}} key
Press to start scanning originals or copy-
ing. Press to start scanning and printing
in Document Server mode.
15. {{{{Clear/Stop}}}} key
• Clear
Press to clear numbers entered.
• Stop
Press to stop a copy job in progress.
Press to stop scanning and printing in
Document Server mode.
16. {{{{#}}}} key
Press to confirm values entered.
17. Number keys
Press to enter a value, such as the number
of copies.
18. Function keys
Press to select the following functions:
• Copy:
• Document Server:
• Scanner:
19. Function Status indicator
These show the status of the above func-
tions:
• Yellow: selected
• Green: active
• Red: interrupted
DolphinC2_ENcopy_F_FM.book Page 4 Friday, February 25, 2005 10:46 AM