Savin 4800WD - Manual (Page 97)

Settings You Can Change with User Tools
87
4
❖ ❖ ❖ ❖ Magnification Key Display
Specifies which scale's reproduc-
tion ratios shown on the initial dis-
play.
Note
❒ Default: Engineering
Edit
❖ ❖ ❖ ❖ Adjust Position
Specifies the default setting for
Print Position Adjustment. See
p.61 “Adjust Print Position”.
Note
❒ Default:
• Metric version: Bottom: 20 mm/
Right: 20 mm
• Inch version: Bottom: 0.8"/
Right: 0.8"
❒ You can adjust the position with-
in the following range:
• Metric version: 0– 200 mm (1
mm increments)
• Inch version: 0– 7.8" (0.1" in-
crements)
❖ ❖ ❖ ❖ Erase Border Width
Specifies the default setting for
Erase Border. See p.48 “Erase Bor-
der”.
Note
❒ Default:
• Metric version: 10 mm
• Inch version: 0.4"
❒ The width can be set as follows:
• Metric version: 2 mm - 99 mm
(1 mm increments)
• Inch version: 0.1" - 2.0" (0.1"
increments)
❖ ❖ ❖ ❖ Erase Original Shadow in Combine
In Combine Copy mode, you can
specify whether to erase a 3 mm,
0.1" bounding margin around all
four edges of each original.
Note
❒ Default: Yes
❖ ❖ ❖ ❖ Image Repeat Separation Line
Specifies a separation line type
when using the Image Repeat
function.
• None
• Solid
• Broken A
• Broken B
• Crop Marks
Note
❒ Default: None
❖ ❖ ❖ ❖ Double Copies Separation Line
Specifies a separation line when
using the Double Copies function.
• None
DolphinC2_ENcopy_F_FM.book Page 87 Friday, February 25, 2005 10:46 AM