Fine magnification – Savin 4800WD User Manual
Page 51
Copier Functions
41
2
GGGG
Enter the length for “Copy: Verti-
cal” using the number keys, and
then press [#].
Note
❒ To change a length, press the
key you want to change, and
then enter the new value.
HHHH
Press [OK].
IIII
Select paper tray.
Fine Magnification
For environment reasons such as hu-
mid conditions, paper may expand or
shrink. This can result in a mismatch
between the size of the original and
copy. This function uses the measure-
ments of the original and the copy to
calculate a ratio to produce copies
that are close to the actual size.
Preparation
Measure the length and width of
the original and the copy, and then
calculate the correction ratio as fol-
lows:
Note
❒ Fine Magnification is used for orig-
i na ls t ha t h av e a lre a d y b e e n
scanned. If you want to apply fine
magnification corrections to paper
that has stretched due to the paper
type or exposure to humid condi-
tions, see "Fine Ratio Adjustment:
Copier", General Settings Guide.
AAAA
Press [Reduce / Enlarge].
BBBB
Press [Fine Magnificatn.].
CCCC
Adjust the horizontal ratio using
[
o
o
o
o] and [n
n
n
n].
DDDD
Adjust the vertical ratio using
[
o
o
o
o] and [n
n
n
n].
Note
❒ To change the value, press [Clear],
and then enter the new one.
EEEE
Press [OK].
ZEDG010E
Calculating the Correction Value (%)
To copy at the same size as the original
Example)
Copy
Original
Horiz.
Horiz.
... For the example above:
correction value(%)
Set the correction value (horizontal) to 0.8%.
DolphinC2_ENcopy_F_FM.book Page 41 Friday, February 25, 2005 10:46 AM