Savin 4800WD - Manual (Page 47)

Copier Functions
37
2
BBBB
Select a ratio, and then press [OK].
Zoom
You can change the magnification in
0.1% (or 1%) increments.
Preparation
You can set the ratio in the follow-
ing ways.
• Using the number keys
• Selecting a ratio close to the one
you want to set from Preset Re-
duce/Enlarge, and then using
[–1%]
, [–0.1%], [+0.1%] or [+1%] to
adjust it.
Note
❒ To set the magnification ratio on
the screen, use [–1%], [+1%]. To
specify a decimal value, use [–0.1%]
or [+0.1%].
AAAA
Press [Reduce / Enlarge].
Using the number keys
A Press [Mag. Ratio].
B Enter the ratio using the num-
ber keys.
Note
❒ Use the {{{{·}}}} key to enter a dec-
imal point.
❒ To change the value, press
[Clear] , and then enter the
new one.
C Press the {{{{#}}}} key.
Selecting a ratio from the preset
ratios, and then using [–1%], [–0.1%],
[+0.1%] or [+1%] to adjust it
A Select a ratio.
B Press [–1%], [–0.1%], [+0.1%] or
[+1%] to adjust the ratio.
ZEDG060E
DolphinC2_ENcopy_F_FM.book Page 37 Friday, February 25, 2005 10:46 AM