Directional size magnification (inch) – Savin 4800WD User Manual
Page 50
Copying
40
2
Note
❒ Pressing [n
n
n
n] or [o
o
o
o] changes
the ratio in increments of
0.1%. Pressing and holding
down [
n
n
n
n] or [o
o
o
o] changes it
in increments of 1%.
❒ If you have incorrectly en-
tered the ratio, readjust it
with [
n
n
n
n] or [o
o
o
o].
D Press [Vertical].
E Adjust the ratio using [n
n
n
n] or
[
o
o
o
o].
F Press [OK].
EEEE
Press [OK].
Directional Size Magnification
(inch)
A suitable reproduction ratio is auto-
matically selected when you enter the
horizontal and vertical lengths of the
original and copy image you require.
Use this function to alter the image.
1.
Horizontal original size
2.
Vertical original size
3.
Horizontal copy size
4.
Vertical copy size
Preparation
Measure and specify the lengths of
the original and copy by compar-
ing “A” with “a”.
Note
❒ You can enter sizes within the fol-
lowing ranges:
AAAA
Press [Reduce / Enlarge].
BBBB
Press [Specifd. Ratio].
CCCC
Press [Dirc. Size Mag. In].
DDDD
Enter the length for “Original:
Horiz.” using the number keys,
and then press [#].
Note
❒ To change the size, press [Clear],
and then enter the new one.
EEEE
Enter the length for “Copy: Horiz.”
using the number keys, and then
press [#].
FFFF
Enter the length for “Original:
Vertical” using the number keys,
and then press [#].
CP2M01EE
Metric
version
1–9999 mm (increments of 1 mm)
Inch
version
0.1"–99.9" (increments of 0.1")
DolphinC2_ENcopy_F_FM.book Page 40 Friday, February 25, 2005 10:46 AM