Savin 4800WD - Manual (Page 32)

Copying
22
2
EEEE
Enter the number of copies using
the number keys.
Note
❒ The copy quantity is from 1 to
99.
FFFF
Place the originals.
Originals feed into the machine,
which then starts copying.
Reference
p.15 “Placing Originals”
Note
❒ When [Press Start Key] is select-
ed in the Feed Start Method,
copying starts when you press
the
{{{{Start}}}} key. See “Feed Start
M e t h o d ” , G e n e r a l S e t t i n g s
Guide”.
❒ To stop originals feeding in,
press the
{{{{Scanner Stop}}}} key. See
p.16 “To stop originals feeding
in”.
❒ Insert the original so that the
right edge is aligned with the
original guide.
❒ The continuous copy speed may
be slow down to ensure the ton-
er fuses to paper in the follow-
ing cases:
• When the machine is just
turned on
• When the temperature is low
• When making a lot of contin-
ues copies (more than 30
sheets/A0, E)
Important
❒ When Basic Authentication, Win-
dows Authentication, or LDAP
Authentication is set, always
log off when you have finished
using the machine to prevent
unauthorized users from using
the machine.
- - - -To stop the machine during a
multi-copy run
Press the
{{{{Clear/Stop}}}} key after the
originals have fed in. The machine
stops when the current copy finishes.
Press [Stop] to cancel the copy job;
press [Continue] to resume the inter-
rupted copy job.
Original Counter/Reset
The number of scanned originals is
displayed in the screen's top right cor-
ner. This allows you to check the
number of originals in a job, or if any
sheets have been fed together, and the
number of copies that will be stored
in the copy output tray.
Resetting the original counter
AAAA
Press [Orig.] and the counter num-
ber in the screen's top right cor-
ner.
The number is reset to 0.
DolphinC2_ENcopy_F_FM.book Page 22 Friday, February 25, 2005 10:46 AM