Savin 4800WD - Manual (Page 91)

Accessing User Tools (Copier Features)
81
4
Accessing User Tools (Copier Features)
This section is for key operators in
charge of this machine. You can
change or set the machine's default
settings.
Note
❒ Be sure to exit User Tools and re-
turn to the initial copy display af-
ter all settings are made. This
section describes system settings
you can set for the copier function.
❒ Any changes you make with User
Tools remain in effect even if the
main power switch or operation
switch is turned off, or the
{{{{Clear
Modes
}}}} key is pressed.
Reference
For details about System Settings,
see “User Tools Menu (System Set-
tings)”, General Settings Guide.
Changing Default Settings
AAAA
Press the
{{{{User Tools/Counter}}}} key.
The User Tools main menu ap-
pears.
Note
❒ When Basic Authentication, Win-
dows Authentication, or LDAP
Authentication is set, the au-
thentication screen will be dis-
played. Enter your login name
and login password, and then
press [Login].
BBBB
Press [Copier / Document Server Fea-
tures]
.
The Copier / Document Server
Features menu is displayed.
CCCC
Select the menu you want to make
settings.
The setting display for each menu
is displayed.
Reference
p.75 “User Tools Menu (Copier
/ Document Server Features)”
DDDD
Change settings by following the
instructions on the display panel,
and then press [OK].
AHD101S
DolphinC2_ENcopy_F_FM.book Page 81 Friday, February 25, 2005 10:46 AM