Savin 4800WD - Manual (Page 27)

Placing Originals
17
1
Placing Custom Size Originals
When placing custom size originals,
specify the size of the originals.
Note
❒ Paper with a vertical size of 210–
15000 mm (8.3"–590.5") and a hori-
zontal size of 210–914 mm (8.3"–
35.9") can be specified with this
function.
❒ If you do not specify the size, parts
of the image may not be copied.
AAAA
Press [Orientation/Custom].
BBBB
Press [Custm Size Orig.].
CCCC
Enter the horizontal size of the
original using the number keys,
and then press [#].
Note
❒ If you make a mistake, press
[Clear] or the {{{{Clear/Stop}}}} key,
and then enter the value again.
DDDD
Enter the vertical size of the origi-
nal using the number keys, and
then press [#].
EEEE
Press [OK].
FFFF
Place the originals, and then press
the
{{{{Start}}}} key.
Wide Scan
The machine checks the original
width and then increases the scan size
to a slightly larger standard size.
Note
❒ Scan size differs depending on the
size of the original. See the follow-
ing table for available scan sizes:
❖ ❖ ❖ ❖ Metric version
❒ The machine adjusts to a scan size
of the same paper series as the
original. If you want to mix the siz-
es of A and B series when scan-
n i n g , c o n t a c t y o u r s e r v i c e
representative.
Original width Scanning
width
Over than A4 K(210 mm)
and less than 257 mm
A3 K(297 mm)
Over than A3 K(297 mm)
and less than 364 mm
A2 K(420 mm)
Over than A2 K(420 mm)
and less than 515 mm
A1 K(594 mm)
Over than A1 K(594 mm)
and less than 728 mm
A0 K(841 mm)
Over than A0 K(841 mm)
and less than 914 mm
914 mm
Over than B4 K(257 mm)
and less than 297 mm
B3 K(364 mm)
Over than B3 K(364 mm)
and less than 420 mm
B2 K(515 mm)
Over than B2 K(515 mm)
and less than 594 mm
B1 K(728 mm)
Over than B1 K(728 mm)
and less than 841 mm
914 mm
DolphinC2_ENcopy_F_FM.book Page 17 Friday, February 25, 2005 10:46 AM