Savin 4800WD - Manual (Page 35)

Basic Procedure
25
2
EEEE
Press the
{{{{Interrupt}}}} key again.
The Interrupt key indicator goes off.
Resuming the previous copy job
A Place your originals, and then
press the
{{{{Start}}}} key.
Exiting interrupt copy
A Press the {{{{Clear Modes}}}} key.
Copying from the Paper
Bypass
Use the paper bypass to copy onto pa-
per sizes that cannot be loaded on the
paper rolls, or cut sheet paper.
Preparation
When copying from the paper by-
pass, you can make multiple cop-
ies for a single original. Specify the
number of copies using the num-
ber keys.
Limitation
❒ The maximum length is 2000 mm
(78").
❒ The width for paper in the paper
bypass is 210 – 914 mm (8 1 /
2
" – 36").
❒ Do not copy on both sides of the
paper.
❒ Do not use paper already copied or
printed on.
Reference
For details about paper type, ori-
entation, and number of sheets
that can be placed in the paper by-
pass, see “Copy Paper”, General
Settings Guide.
You can specify the paper type for
the paper bypass in advance. See
“Paper Type: Bypass Tray”, Gener-
al Settings Guide.
AAAA
Press [Bypass].
BBBB
Make the necessary settings.
Reference
See explanations of each func-
tion.
CCCC
Enter the number of copies using
the number keys.
DDDD
Place your original and scan it.
Reference
p.15 “Placing Originals”
EEEE
Adjust the paper bypass's paper
guides to the size of the paper.
AHD054S
AGL058S
DolphinC2_ENcopy_F_FM.book Page 25 Friday, February 25, 2005 10:46 AM