Savin 4800WD - Manual (Page 75)

Programs
65
2
Programs
You can store frequently used copy
job settings in machine memory and
recall them for future use.
Note
❒ You can store up to 10 programs.
❒ You can select the standard mode or
Program No.10 as the default mode
to be set when modes are cleared or
reset, or immediately after the oper-
ation switch is turned on. See p.85
“Change Initial Mode”.
❒ Paper settings are stored based on
paper size. However, if you have
more than one paper tray contain-
ing the same size paper, the tray
prioritized with User Tools (Sys-
tem Settings) is selected first. See
“Paper Tray Priority” in “Tray Pa-
per Settings”, General Settings
Guide.
❒ Programs are not deleted by turn-
ing the power off or pressing the
{{{{Clear Modes}}}} key. They are can-
celed only when you delete or over-
write them with another program.
Storing a Program
AAAA
Edit the copy settings so all func-
tions you want to store in this pro-
gram are selected.
BBBB
Press the
{{{{Program}}}} key.
CCCC
Press [Register].
DDDD
Press the program number you
want to store.
Note
❒ Program numbers displayed with
m next to them already have
settings.
Reference
p.66 “Changing a Stored Pro-
gram”
EEEE
Enter the program name using the
letter keys on the display panel.
You can enter up to 40 characters.
Reference
For details about entering char-
acters, see “Entering Text”, Gen-
eral Settings Guide.
Note
❒ If you do not want to enter a
program name, proceed to step
F .
FFFF
Press [OK].
When the settings are successfully
stored, the
m indicator followed
by the program number and pro-
gram name will be displayed. Af-
ter a while, the screen reverts back
to the initial copy display.
AHD055S
DolphinC2_ENcopy_F_FM.book Page 65 Friday, February 25, 2005 10:46 AM