Apex Digital 5708009-C - Manual (Page 118)

4-72 5708009-C
Advanced Energy
®
Host Port—DeviceNet
This section describes the DeviceNet Host port interface. To determine if your Apex
unit has this interface, use the PIN from your Apex unit and the following
Configuration Note.
The DeviceNet connector is either a 5-pin, male, Lumberg, RSF 5/0.5m or Turck FS
4.5.
Figure 4-9. DeviceNet connector
Table 4-12 describes the DeviceNet port pin signals.
This section of the manual provides information for the:
DeviceNet option
PIN position 6, (A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17) option 2.
(When identifying the PIN position, remember that the A at the beginning of
the PIN is not counted as a position. The PIN option is the number or letter
you should look for in the specified position.)
For more information about the PIN and for a complete list of how PIN
positions correspond to Apex product options, see Table 1-1. on page 1-4.
Table 4-12. Host Port DeviceNet Pins
Signal
Pin
Name Description
1 DRAIN Shield
2 V+ DeviceNet supply
3 V- DeviceNet supply