Apex Digital 5708009-C - Manual (Page 13)

5708009-C 1-1
Chapter
Apex 1 to 5.5 kW Generator
Chapter
1
1
Introduction
This chapter contains several kinds of introductory information.
• “Using this Manual to Find Information for Your Generator” on page 1-1
provides important instructions on locating the information in this manual that is
applicable to your Apex unit.
• “Interpreting the Manual and Unit Labels” on page 1-9 provides information on
interpreting the type conventions, safety warnings, and labels found in this manual
and on the Apex unit.
• “Safety” on page 1-12, “Product Safety/Compliance” on page 1-12, and
“Installation Requirements” on page 1-15 provide important safety and
compliance information about the Apex generator.
READ THIS SECTION!
To ensure safe operation, you should read and understand this manual before you
attempt to install or operate the Apex unit. At a minimum, read and heed “Safety” on
page 1-13.
USING THIS MANUAL TO FIND INFORMATION FOR
YOUR GENERATOR
The Apex generator can be ordered with many configurable options such as different
output levels, input and output connectors, and so on. This manual covers many of
these options, some of which will apply to your generator and some of which will not.
This section of the manual is designed to help you quickly find the information that
applies to your unit.
Note: This manual does not cover all the Apex generators; some units are covered in
other manuals. To make sure that you will be able to find the correct
information, use the manual that came with that specific unit.
Understanding PIN Numbers and Apex Configuration
The options installed on any Apex generator (that is, the configuration of the
generator) are defined by an PIN number that is located on the serial number tag of the
generator. Figure 1-1 is an example of a serial number tag.