Apex Digital 5708009-C - Manual (Page 77)

5708009-C 4-31
Apex 1 to 5.5 kW Generator
11 12 INTERLOCK When connected
externally, these pins
close the interlock and
allows RF output to be
enabled.
See Wiring Diagram 4-31.
12 INERLOCK RETURN See pin 11
13 NETWORK STATUS
LED OUTPUT
(GREEN)
Digital
output
This pin provides the
output for remote
DeviceNet LED and is
connected to the emitter of
an opto-coupler. The User
must limit the current
draw through this pin to
45mA or less.
Note: Defined by
DeviceNet
Specification,
Release 2.0
See Wiring Diagram 4-24.
Table 4-3. User Port (15-pin) Connector Pins Exclusive for Configuration E (Continued)
Signal
Pin
Return
Pin
Name Signal
Type
Description