Apex Digital 5708009-C - Manual (Page 15)

5708009-C 1-3
Apex 1 to 5.5 kW Generator
notes are best used to confirm that a particular section of the manual applies to the
option installed on a specific Apex unit. They also refer back to Table 1-1, which
provides complete configuration information
Figure 1-2. Example configuration note
Using the PIN to Identify Apex Options
Table 1-1 shows all the options associated with each PIN position. When appropriate,
it also provides cross references to help you locate the sections of the manual
associated with your unit. For example, to find information about the output connector
on your unit, look through the table to find the PIN position associated with output
connectors, which is 11 (see row 11 of the table). Then find that position in the PIN
for your Apex unit (remember, the A at the beginning of the PIN does not count as a
position) and note the number or letter in that position. Using the right-most cell in the
correct row, identify the option installed in your unit and use the cross-reference to
locate the information on that option.
Note: Not all configurations are currently available and this manual does not cover all
currently available options. (Some options are covered in other manuals).
Therefore, not all of the options listed in the table are covered in this manual. To
make sure that you will be able to find the correct information for your unities
the manual that came with that specific unit. Contact AE for any questions
about availability of specific configurations. (For contact information, see “AE
Customer Support” on page 6-11.)
This section of the manual provides information for the:
DeviceNet option
PIN position 6, (A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17) option 2.
(When identifying the PIN position, remember that the A at the beginning of
the PIN is not counted as a position. The PIN option is the number or letter
you should look for in the specified position.)
For more information about the PIN and for a complete list of how PIN
positions correspond to Apex product options, see Table 1-1. on page 1-4.