Apex Digital 5708009-C - Manual (Page 99)

5708009-C 4-53
Apex 1 to 5.5 kW Generator
171
read ext
feedback
limit
Requests external feedback limit (set by
CMD 6)
Note: The response in data bytes 1 and 2
represent the user external feedback
limit (LSB first). It returns the user
external feedback limit.
2 data bytes
16-bit value
173 report
power
dissipation
Reports dissipated power
Note: The response in data bytes 1 and 2
represent dissipated power (LSB first).
It returns dissipated power.
2 data bytes
16-bit value
184
read out-of-
setpoint
interval
Requests how long the generator is
programmed to produce output that is not
equal to the programmed setpoint level
before shutting output off (set with CMD 15).
Note: Data bytes 1 and 2 represent the
unsigned integer value for out of
setpoint time interval (LSB first). It
reports how many seconds the
generator will produce output that is
not equal to the setpoint before turning
the output off.
2 data bytes
16-bit value
185
read
allowable
deviation
Requests what percentage the generator can
be out of setpoint before it starts the out-of-
setpoint timer (set with CMD 16).
Reports the allowable setpoint deviation
Note: The response reports the percentage (1
to 99) and the supply can be out of
setpoint before turning on the out-of-
setpoint timer.
1 data byte
8-bit value
Table 4-6. Host Port Commands for RS-232 with AE Bus (Continued)
Command
Description
Number of
Host Data
Bytes
Number of
Response
Data Bytes