Sony COM-1 - Manual (Page 117)

COM-1.US.2-668-393-12(2)
Communication — Ad Hoc Application
Communication
— Ad Hoc Application
117 117
Starting the Ad Hoc Application
The unit’s Ad Hoc Application enable you to stream audio files between units
communicating over a one-to-one wireless connection.
Note
• The settings in “Profile” of “General Settings” in the Tool menu are visible to other
users when you use the Ad Hoc Application. Before using the Ad Hoc Application, see
the “On handling the personal information” section ( page 205).
Turning on the wireless LAN in Ad Hoc mode
For more information about the Ad Hoc mode, see the sections of “Wireless
LAN Settings — Ad Hoc Mode” in the Start-up Guide.
WIRELESS LAN
switch/indicator Status indicator

On the Home menu, press / to select “Communication,” and
then press the center button.

Press / to select “Ad Hoc Application,” and then press the
center button.
The unit automatically turns on the wireless LAN in Ad Hoc mode. The
WIRELESS LAN indicator lights up green, and the status indicator lights
up orange.
When the connection to wireless network in Ad Hoc mode is completed,
the Ad Hoc Contact screen appears, and
starts blinking on the status
bar of the display.
A list of nearby users who are online in Ad Hoc mode is displayed.
To register a specific user, the user’s unit and your unit must both be
turned on wireless network in Ad Hoc mode at the same time.
Continued 
Table of
Contents
Index