Sony COM-1 - Manual (Page 22)

COM-1.US.2-668-393-12(2)
Getting Started 22 22
Starting the Unit
Turning on the unit
Make sure that the battery is fully charged first. For how to connect the unit,
refer to  page 18.
POWER switch/indicator

Slide down and hold the POWER switch.
The unit turns on, and the POWER indicator lights up green. The Home
menu appears after the start-up screen is displayed for about 30 seconds.
When you turn on the unit for the first time, the initial set-up wizard
appears. Follow the instructions on the display.
If it has been more than three days since the last time the unit was used,
the start-up screen is displayed.
In other situations, the screen that was being displayed when the unit was
turned off appears.
To turn off the unit
Slide down and hold the POWER switch. The unit turns off, and the POWER
indicator turns off.
Notes
• Do not remove the battery and disconnect the AC power adaptor while the start-up
screen is displayed.
• The unit cannot be turned off while the HOLD feature is on. You can, however, turn on
the unit while the HOLD feature is on by sliding down and holding the POWER switch.
Continued 
Index
Table of
Contents