Caution - test is with power on – Balboa Water Group BP 60Hz User Manual

Page 42

Advertising
background image

42

Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417, 834 b2,

Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.

4/22/13

Testing Low Speed and High Speed at the AMP Pump Connector

WITH THE PUMP LOW SPEED ON,

TAKE A VOLTAGE READING AT THE

AMP RECEPTACLE ON THE PCB

THIS WOULD TYPICALLY SHOW LOW

SPEED VOLTAGE FOR PUMP ONE. (240V)

WITH THE PUMP HIGH SPEED ON,

TAKE A VOLTAGE READING AT THE

AMP RECEPTACLE ON THE PCB

THIS WOULD TYPICALLY SHOW HIGH

SPEED VOLTAGE FOR PUMP ONE. (240V)

Ground

Neutral (Common)

Typically Line voltage for 2-speed pumps

Typically Line voltage

Note flat sides in connector

Board Connector Key

Note: These are typical settings only.

Voltages may be different depending

on the configuration that the system is

set to. See the system's Tech Sheet for

complete information.

PUMP 1 AMP CORD

TESTING LOW SPEED AND HIGH SPEED AT THE AMP CONNECTOR

CAUTION - TEST IS WITH POWER ON

Advertising