Balboa Water Group BP 60Hz - Manual (Page 57)

57
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417, 834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42211B
TP800, TP900 Sensor and System Related Messages (cont.)
DRAIN MODE
Main Screen > Settings > Hold > Drain
Some spas have a special feature that allows Pump 1 to be
employed when draining the water.
When available, this feature is a component of Hold mode.
UTILITIES MENU
Main Screen > Settings > Utilities
The Utilities Menu contains the following:
A/B TEMPS
When this is set to On, the temperature display will alternate to
display temperature from Sensor A and Sensor B in the heater.
DEMO MODE
Main Screen > Settings > Utilities > Demo Mode
Demo mode is not always enabled, so it may not appear. This is
designed to operate several devices in a sequence in order to
demonstrate the various features of a particular hot tub.
FAULT LOG: TP800, TP900
Main Screen >Settings > Utilities > Fault Log
The Fault Log is a record of the last 24 faults that can be re-
viewed by a service tech.
GFCI TEST (FEATURE NOT AVAILABLE ON CE RATED
SYSTEMS.)
GFCI Test is not always enabled, so it may not appear. This
screen allows the GFCI to be tested manually from the panel and
can be used to reset the automatic test feature. If the GFCI Test
Feature is reset, the device will trip within 7 days.
Exit
Drain Off
Holding for 0:58
System Hold
Back
Utilities
A/B Temps Off
Demo Mode Off
Fault Log
GFCI Test
Fault Log
Entry 2
Message Code 19
1 Days Ago 2:21PM
Rest Mode
High Range
Set Temp 104°F
Sensors: A: 100 B: 96
Message:
Sensors are out of sync
Back
Back Demo Mode Off
Fault Log
GFCI Test
Utilities