Balboa Water Group BP 60Hz User Manual
Page 69
69
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417, 834 b2,
Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All material copyright of Balboa Water Group.
42211B
TP400, TP600 Simplified vs. Standard Panel Operations
SIMPLIFIED MENUS
Simplified Menus is an option that manufacturers (OEM's) offer
to their end users in order to provide an easier to navigate
menu. A simplified menu structure does not have extended
features such as Utilities, Restricting Operation, Unlocking, and
so on; yet, provides basic spa operations that satisfy the needs
of end users. Navigating the menu structure is similar for both
standard and simplified menus, which is done using two or
three buttons on the control panel.
All TP600 and TP400 panels are compatible with simplified
menus and standard menus, and can access Test Mode.
Regardless of menu structure, test modes have full functionality.
The control panel user guides for standard and simplified menus
are different: Balboa user guide 40940 describes standard
menus; user guide 42185 describes simplified menus.
Menu attributes are embedded within the spa control system
at the factory. Swapping out one panel with another will not
change a simplified menu to a standard menu, and vice versa.
For the system to be changed from one menu structure to
another is dependent on whether that option was programed
into the system at the time of manufacturing.
CHANGING MENUS THROUGH CONFIGURATIONS
If the option of an alternate menu structure is available, then it
is possible to change the simplified menu to a standard menu,
and vice versa. A technician must refer to the Tech Sheet of that
particular system to see what configuration (if any) is available.
For instance, if a technician plans to install or modify a Sunrise
Spas BP 240V system (in this example), and that system has
standard menus that he wishes to change to simplified menus,
he would refer to Tech Sheet SR240BP5 (No. 56415-97, Rev. A).
Page two provides information in the System Revision History:
"240V-only version with both Simplified Menus and Full Menus".
The next giveaway of dual menu options is the section headers
on the following pages. See below.
Page 3: An option is given to use Setup 1, or Setup 7.
UÊ
Below that, an option is given to use Setup 2, or Setup 8.
UÊ
Page 4: An option is given to use Setup 3, or Setup 9.
UÊ
In these three examples (out of six possible dual menu options
available for this system), Setups 1, 2, or 3 could be chosen for
a simplified menu. Of course, the option is open to configure a
counterpart control system to standard menus by choosing Setup
7, 8, or 9 respectively.
Setup 1 – Simplified Menu (with Flip) Setup 7 – Full Menu
Setup 2 – Simplified Menu (with Flip) Setup 8 – Full Menu
Setup 3 – Simplified Menu (with Flip) Setup 9 – Full Menu
Headings of Setups 1, 2, & 3 in Tech Sheet SR240BP5 (12-05-12, Rv. A)
Page 3:
Page 3:
Page 4: