Airlink EDGE/GPRS - Manual (Page 101)

PinPoint-E EDGE/GPRS - User Guide, version 2.32 95
AT Commands: PPP/Ethernet
*HOSTPRIVIP=d.d.d.d
*HOSTPRIVMODE=n
*HOSTPW=string
*HOSTUID=string
Set or query the private IP address that is to be negotiated by the EDGE/GPRS connection if
*HOSTPRIVMODE =1.
d.d.d.d=IP Address
Set or query whether a private or public (network) IP is to be used when the Host initiates a
EDGE/GPRS connection to the modem.
n=0 : Public (network) IP Mode: When the Host initiates a PPP connection, the host will be given the
network IP address that was obtained from Your Wireless Service Provider while registering on the net-
work. If the network issues a new IP address, the
EDGE/GPRS connection will be closed (since the IP
address has changed) and has to be re-initiated. (default).
n=1 : Private IP Mode: When the Host initiates a EDGE/GPRS connection, the host will be given the IP
address specified in *HOSTPRIVIP. The modem will then perform 1 to 1 NAT-like address translation,
which shields the Host from network IP changes.
Host Password forPPPoE.
string=password
Host User ID forPPPoE.
string=user id (up to 64 bytes)