Airlink EDGE/GPRS User Manual
Page 79
PinPoint-E EDGE/GPRS - User Guide, version 2.32
73
AT Commands: Information and Status
*POWERMODE?
&V
+CCID
+CIMI
•
Network Negotiation Fail
Network connection negotiation failed. This is usually temporary and often clears up dur-
ing a subsequent attempt.
•
Network Ready
The
PinPoint-E
is connected to the EDGE/GPRS network and ready to send data.
•
Network Dormant
The
PinPoint-E
is connected to the EDGE/GPRS network, but the link is dormant. It will be woken
up when data is sent or received.
•
No Service
There is no
EDGE/GPRS
network detected.
•
Hardware Reset
The hardware module is being reset. This is a temporary state.
Displays the current power state/mode. Possible values returned are:
•
Initial
The modem is in the initial 5 minutes since power up, so power down event will be
ignored.
•
On
Regular power on, a power down is not pending.
•
Low Cancellable
Power down is pending but still cancelable if the power down trigger goes away.
•
Low Pending 1 and 2
Power down is pending, any modem tasks are gracefully preparing for the power down.
•
Low Final
Power down is imminent.
•
Low
Power is down.
View active profile (the contents of the active registers).
Not displayed with Wireless Ace.
Subscriber Identity Module ID
International Mobile Subscriber Identity